Central Semiconductor has created a line novel of zero temperature coefficient current limiting diodes, packaged in DPAK and rated at between 27 and 575mA. Minimum voltages range across 1.5 to 2V – ...

These old 1N5305 current limiting diode regulators are simply constructed from a JFET with an internal feedback resistor to its gate which maintains a fixed current output.

While this will provide a good current limit with well-behaved loads, it may not turn on the 2N3904 quickly enough with severe loads. So I added the little diode D4.

The Current Limiting Diodes Market is expected to reach USD 219.0 million by 2027 from USD 159.8 million in 2018, at a CAGR of 6.5%.

This circuit uses a few standard discrete components to provide a user-settable current-limit function with closed-loop performance. In addition, the limiter function can be turned on and off via ...

The current limiting circuit, though, is where things get interesting. Rather than use an op-amp, [DiodeGoneWild] chose a simple discrete transistor current-sense circuit.

Teledyne e2v HiRel today announced two new additions to its family of high power limiters, the TDLM052402, a quasi-active, 2 kW, L/S/C-band SMT PIN Di ...

A. An overcurrent device (typically a fast-acting fuse) that reduces the fault current to a magnitude substantially less than that obtainable in the same circuit if the current-limiting device wasn’t ...

For best results in high current applications, the voltage limiter should be installed between the voltage source and the device to be protected. I tested various diodes: Zener, silicon PN, Schottky ...